Retractable Golf Impact Screen | Motorized Ceiling-Mount Simulator Bay
The Retractable Golf Impact Screen is a fully motorized, ceiling-mounted simulator bay that deploys in seconds and disappears completely when you're done. Custom-built to your exact room dimensions — from 8 to 16 feet wide — it delivers a pro-grade hitting surface with a three-layer impact screen rated for ball speeds up to 250 mph, then rolls flush to the ceiling so your garage, basement, or spare room stays fully usable.
Why Customers Choose This Screen
- Retracts completely out of sight — no permanent structure, no wasted space
- One remote controls the screen and side panels independently or together
- Custom-sized to your room down to the inch, 8–16 ft wide
- Three-layer impact material rated for real golf balls up to 250 mph
- Compatible with all major launch monitors and simulator platforms
- Assembled in Austin, Texas with tight quality control on every kit
- Preset motor limit stops — lands in the exact same position every time
Product Highlights
Fully Motorized, One Remote
A single remote lowers the screen to a preset play position and retracts it flush to the ceiling. The same remote controls the side panels independently or together for a fully enclosed bay or a custom layout.
Premium Three-Layer Impact Screen
The smooth outer face delivers a bright, high-contrast projection surface with no hot spots. The middle layer disperses impact energy across a wide area, and the backing layer controls ball rebound — dropping it roughly a foot off the screen rather than back toward the golfer.
Custom-Built to Your Room
Choose a screen width from 8 ft to 16 ft in 6-inch increments, with side-wall panel depths from 4.5 ft to 9 ft. Ceilings above 10 ft are accommodated with a custom black extension panel for a seamless finish.
Works With Every Major Launch Monitor
A plug-and-play upgrade compatible with Foresight Sports, Trackman, Uneekor, SkyTrak, FlightScope, Bushnell, Garmin, Rapsodo, and more — no changes to your existing hardware or software required.
Assembled in Austin, Texas
Domestic assembly means tighter quality control on every custom kit and faster turnaround than overseas-built alternatives. Typical lead time is approximately 2–3 weeks from order date.
Rated for Thousands of Cycles
Motors are matched to the weight and repeat-use demands of a simulator installation and rated for thousands of deployment cycles. Preset upper and lower limit stops eliminate manual adjustment over time.
Specifications
| Specification | Detail |
|---|---|
| Screen widths | 8 ft – 16 ft (6-inch increments) |
| Custom sizing | Yes — down to the inch |
| Side-wall depth options | 4.5 ft – 9 ft |
| Standard ceiling height | 8–10 ft (extension panel available for taller ceilings) |
| Screen material | Three-layer premium impact screen |
| Ball speed rating | Up to 250 mph |
| Operation | Fully motorized, single remote |
| Motor limit stops | Preset upper and lower limits |
| Cycle rating | Rated for thousands of deployments |
| Assembled in | Austin, Texas, USA |
| Lead time | Approx. 2–3 weeks |
| Launch monitor compatibility | All major platforms |
Ideal For
- Homeowners who want a simulator bay in a multi-use room (garage, basement, spare bedroom)
- Golfers who practice year-round and need a permanent-quality setup without a permanent footprint
- Commercial facilities, golf studios, and training centers with shared-use spaces
- Existing simulator owners upgrading from a fixed-frame screen to a retractable system
- Rooms with 8–10 ft ceilings (or taller with the extension panel option)
Important Information
- Professional installation recommended. The system mounts to ceiling joists or a structural header. Verify that your ceiling structure can support the unit's weight before installation. Consult a qualified contractor if you are unsure.
- Custom orders are made to order. Because each system is built to your specified dimensions, custom orders are non-returnable once production begins. Review your measurements carefully before placing your order.
- Always use a hitting mat. Use an appropriate golf hitting mat to protect your flooring and reduce impact stress on the surrounding structure.
- Keep the impact zone clear. Ensure no people, pets, or objects are in the ball flight path during use.
- Electrical requirements. The motorized system requires a standard electrical outlet within reach of the installation location. Consult an electrician if an outlet needs to be added.
Frequently Asked Questions
▶ What is the Retractable Golf Impact Screen?
It is a fully motorized, ceiling-mounted golf simulator screen that deploys and retracts at the push of a button. Each system is custom-built to your room width — from 8 to 16 feet in 6-inch increments — and uses a three-layer premium impact screen rated for ball speeds up to 250 mph.
▶ How does the retractable system work?
The screen is wound onto a ceiling-mounted roller tube. The remote lowers it to a preset stopping point for play, then rolls it back up flush to the ceiling. There is no permanent structure, no manual assembly, and no visible hardware when the screen is retracted.
▶ What ceiling height do I need?
The standard system is designed for ceilings up to 10 feet. For ceilings taller than 10 feet, a custom black extension panel fills the gap above the screen opening for a clean finish. Share your exact ceiling height when ordering for the correct configuration.
▶ Does it work with real golf balls?
Yes. The three-layer impact screen is rated for real golf balls at speeds up to 250 mph, covering the full swing-speed range for virtually every golfer.
▶ Can I control the screen and side panels separately?
Yes. The remote operates the main screen and each side panel individually or all at once, so you can configure the bay to suit your space and practice setup.
▶ What sizes are available?
Screen widths run from 8 to 16 feet in 6-inch increments, with side-wall depths from 4.5 to 9 feet. Custom sizes down to the inch are available — contact Golf Room HQ for a quote on any configuration outside the standard range.
▶ How long does it take to ship?
Standard and custom sizes typically ship in approximately 2–3 weeks from the order date. Lead times may vary during peak periods.
▶ Where is it assembled?
Every system is assembled in Austin, Texas. Domestic manufacturing allows for tighter quality control and faster turnaround compared to overseas-built systems.
▶ Which launch monitors and simulator software does it work with?
The system is compatible with all major launch monitor platforms, including Foresight Sports, Trackman, Uneekor, SkyTrak, FlightScope, Bushnell, Garmin, and Rapsodo. No changes to your existing hardware or software are required.
If you are ready to add a clean, high-performance simulator bay to your space without giving up the room, the Retractable Golf Impact Screen is built for exactly that. Configure your size, place your order, and Golf Room HQ will handle the rest.
